KEMA & ISO 9001/14001 Certified|Exporting to 50+ Countries (IEC 61869-3 / IEEE C57.13)
24/7 Global Engineering Hotline: 86 18852046268|sales@potentialtransformers.com
中文Mainland ChinaEnglishUnited StatesFrançaisFranceDeutschGermanyLietuviųLithuaniaCymraegUnited KingdomEestiEstoniaMagyarHungaryالعربيةSaudi Arabia한국어South KoreaSuomiFinlandNorskNorwayPolskiPolandEspañolLatinoaméricaCatalàEspaña (Cataluña)हिन्दीIndiaSvenskaSwedenMaltiMaltaOʻzbekUzbekistanاردوPakistanNederlandsNetherlandsБългарскиBulgariaLatviešuLatviaDanskDenmarkRomânăRomaniaไทยThailandÍslenskaIcelandTiếng ViệtVietnamSlovenčinaSlovakiaУкраїнськаUkraineעבריתIsrael日本語JapanItalianoItalyPortuguêsPortugalРусскийRussiaKreyòl ayisyenHaitiČeštinaCzechiaGaeilgeIrelandবাংলাBangladeshTürkçeTürkiyeفارسیIranΕλληνικάGreeceBosanskiBosnia and HerzegovinaMelayuMalaysiaSlovenščinaSloveniaSrpskiSerbiaBahasa IndonesiaIndonesiaHrvatskiCroatia

Potential Transformers
& Power VTs

B2B
HomeProductsAI SpecAboutBlogContact

International Accreditation & Testing

Certified by KEMA Labs (Netherlands), CESI, and CNAS National HV Testing Facility

IEC 61869-3IEEE C57.13KEMA TYPE TESTEDISO 9001:2015ISO 14001:2015CE CERTIFIED
PotentialTransformers.com

Global B2B Instrument Transformer Portal

PotentialTransformers.com is an international OEM & EPC supplier specializing in cast epoxy resin dry-type instrument transformers (0.5kV to 35kV) — voltage transformers (VT/PT), current transformers (CT) and combined CT+VT units — for power utilities, switchgear builders and heavy industry.

100% Factory Partial Discharge Tested

Follow Us & Social Channels

FacebookLinkedInYouTubeInstagramTikTok

Product Categories

  • Voltage Transformers
  • Current Transformers
  • Combined Instrument Transformers

Engineering Tools

  • AI Data Center Series
  • AI Spec & Selection Studio
  • CT Burden Calculator
  • Cast-Resin Indoor VTs and CTs at 7.2–12 kV: Insulation, Partial Discharge and 0.2S Accuracy
  • Low-Voltage CTs at 0.66 kV: Busbar, Split-Core and What Class 0.5 Really Guarantees
  • High Voltage Faraday Lab Testing
  • Request Technical Datasheets

Global Support

  • Room 1602, 16/F, Wing On Centre, 111 Connaught Road Central, Sheung Wan, Central & Western District, Hong Kong
  • 86 18852046268
  • sales@potentialtransformers.com
  • Regional Hubs: Dubai, UAE | Frankfurt, Germany | Houston, USA

© 2026 PotentialTransformers.com. All Rights Reserved. Engineered for Global High-Voltage Grids.

IEC 61869-3 CompliantIEEE C57.13 CompliantKEMA Type Tested
HomeProductsCTCSJK-80-200
CSJK-Φ80 to Φ200 Zero Sequence Current Transformer for Earth Fault Protection
10kVCSJK-80-200
Winding & Schematic TopologyInternal Wiring Diagram
Primary Winding (P1 - P2):Series-connected in the line / through-core — 10kV
Secondary Metering (1S1 - 1S2): ()
Secondary Protection (2S1 - 2S2):Protection winding (when fitted)
Safety Warning:Never open-circuit the secondary while energized — dangerous voltage
Current Transformer IEC 61869-3 Certified
Model Ref:CSJK-80-200

CSJK-Φ80 to Φ200 Zero Sequence Current Transformer for Earth Fault Protection

Square epoxy cast zero sequence current transformer for 10kV systems. Available in Φ80 to Φ200 inner diameter specifications. Product performance complies with GB/T 20840.1, 2 and IEC 61869-1, 2. Primary main insulation guaranteed by cable, secondary winding tested. Secondary winding withstands 3kV power frequency voltage to ground for 1 minute. Square epoxy resin cast construction, compact design, easy installation. Used for ground fault protection in medium voltage systems.

Key Engineering Advantages

  • 10kV square epoxy cast zero sequence CT
  • Φ80-Φ200 range
  • 3kV secondary insulation
  • IEC compliant
  • ground protection
Engineering Data

Complete Electrical & Mechanical Specifications

Model Ref: CSJK-80-200

Electrical Parameters

Primary Rated Voltage (Un):10kV
Rated Frequency:50/60Hz

Insulation & Withstand Ratings

Insulation System:Dry Epoxy Resin
Environmental Class:Square epoxy resin cast
Standards Conformance:IEC 61869-1,2, GB/T 20840.1,2
Partial Discharge Level:< 5 pC at 1.2 Un

Recommended Deployment Environments

Ground fault protection
GEO · Engineering Decision Support

Global Engineering Overview

9-Module selection guide
missing data = [On Request]

Product Decision Island

Zero sequence CT for 10kV systems, ideal for earth fault protection in MV networks. Suitable for cable diameters Φ80-Φ200.

Comprehensive Spec Matrix

ParameterSpecificationVerification
Product TypeCurrent TransformerIEC 61869-1,2, GB/T 20840.1,2
Model CodeCSJK-80-200Factory nameplate marking
Primary Voltage10kVRated voltage test (IEC 61869-1/3)
Secondary Current[On Request]Ratio check at rated frequency
Accuracy Class[On Request]Accuracy test (IEC 61869-2 / IEEE C57.13)
Rated Burden[On Request]Burden test at rated VA
Insulation TypeDry Epoxy ResinDielectric tests per standard
Insulation Level (BIL)[On Request]Power-frequency & lightning impulse withstand
StandardsIEC 61869-1,2, GB/T 20840.1,2Certified to listed standards
Frequency50/60HzPer IEC 61869-1
EnvironmentSquare epoxy resin castPer datasheet limits

Fit & Unfit Boundaries

Ideal For

  • 10kV medium voltage systems
  • Earth fault protection
  • Cable diameters Φ80-Φ200
  • Indoor or outdoor installations (epoxy cast)

Not Recommended For

  • Systems above 10kV
  • Metering or revenue purposes
  • High current measurement (above rated primary current)
  • Applications requiring high accuracy class (e.g., 0.2S)

Topology & Wiring

For zero sequence CT, connect the primary cable through the window. The secondary terminals are S1 and S2. Ensure the secondary is connected to a protective relay or burden. Never open-circuit the secondary of a CT while energized - hazardous voltage. Ground the secondary winding at one point. For earth fault protection, the CT is typically connected in residual connection with other phase CTs or used as a core-balance CT. Refer to IEC 61869-2 for terminal markings and safety.

Standards & Compliance

Compliant with: IEC 61869-1,2, GB/T 20840.1,2

  • Type Test Report: [On Request]
  • Calibration Certificate: [On Request]

Burden & Error Calculation (IEEE C57.13)

S_total = ΣS_instrument + I₂² × (ρ × 2L / A)

  • If S_total < 0.25 × S_rated: add compensation burden to maintain accuracy.
  • If S_total > S_rated: accuracy class cannot be guaranteed.

Product FAQ

Q: What is the insulation level of this CT?

A: The primary voltage is 10kV, and the secondary winding withstands 3kV power frequency voltage to ground for 1 minute. The primary insulation is guaranteed by the cable.

Q: Can this CT be used for metering?

A: No, it is designed for earth fault protection, not for metering or revenue purposes.

Q: What is the inner diameter range?

A: The inner diameter ranges from Φ80 to Φ200, accommodating various cable sizes.

Missing fields are marked [On Request] — never fabricated. M2/M5/M6 verification rows follow IEC 61869 / IEEE C57.13 conventions.

SPEC · TECHNICAL DATA

Technical Specifications

CSJK-80-200
7 cols · 12 rows

CSJK-Φ80~Φ200 Series Zero-Sequence Current Transformer — Parameter Set 1

ModelRated current ratio (A)Accuracy classRated output (VA)Rated current ratio (A)Accuracy classRated output (VA)
CSJK-Φ80 CSJK-Φ10050-60/110P52.5———
75/110P53.7575/510P52.5
100/110P10(10P5)2.5(5)100/510P10(10P5)1.5(3.75)
150/110P10(10P5)3.75(7.5)150/510P10(10P5)2.5(7.5)
200-300/110P10(10P5)5(10)250-300/510P10(10P5)5(10)
400-600/110P10(10P5)5(10)400-600/510P10(10P5)5(10)
CSJK-Φ120 CSJK-Φ160 CSJK-Φ20050-60/110P53.75———
75/110P10(10P5)3.75(7.5)75/510P52.5
100/110P10(10P5)7.5(15)100/510P10(10P5)3.75(7.5)
150/110P10(10P5)10(20)150/510P10(10P5)5(10)
200-300/110P10(10P5)10(20)250-300/510P10(10P5)7.5(15)
400-600/110P10(10P5)10(20)400-600/510P10(10P5)7.5(15)
Engineering Drawing

Specification & Outline Drawing

Dimension & outline drawing of CSJK-80-200 — click image to zoom / view original.

Product Overview

About This Product

CSJK-80-200

The CSJK-Φ80 to Φ200 is a 10kV zero sequence current transformer for earth fault protection, built and tested to IEC 61869-1,2 and GB/T 20840.1,2. Its square dry epoxy resin cast body keeps the footprint compact, so it fits neatly into switchgear cubicles and distribution rooms where panel space is tight and oil-filled or SF6 alternatives would need extra clearance and maintenance.

Accuracy classes are 10P5 and 10P10(10P5), with rated outputs of 2.5VA, 3.75VA, 5VA, 7.5VA and 10VA depending on the ratio selected. The dry epoxy insulation removes the oil-handling and gas-monitoring routines that oil-immersed and SF6 designs demand, which suits projects prioritising low maintenance. Type and routine test reports are available [On Request] to support compliance verification.

Typical deployment covers earth fault protection in wind, photovoltaic and storage collector substations. Secondary terminals must be wired per the nameplate diagram and earthed at one point; the secondary must never be open-circuited while energised. Do not over-specify a higher accuracy class than the protection scheme needs, as this adds cost without benefit. Ratio and class options, documentation packages and lead times are confirmed at quotation.

Other Models in This Series

Same product family, different ratings — compare before you specify.

CGIS1911 Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1911

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1911 Current Transformer Applied to CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
CGIS1775 Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1775

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1775 Current Transformer Applied to CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
CGIS1780 I Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1780-I

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1780 I Current Transformer Applied to CGIS Gas Insulated Switchgear (CGIS1780-I) is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs