KEMA & ISO 9001/14001 Certified|Exporting to 50+ Countries (IEC 61869-3 / IEEE C57.13)
24/7 Global Engineering Hotline: 86 18852046268|sales@potentialtransformers.com
中文Mainland ChinaEnglishUnited StatesFrançaisFranceDeutschGermanyLietuviųLithuaniaCymraegUnited KingdomEestiEstoniaMagyarHungaryالعربيةSaudi Arabia한국어South KoreaSuomiFinlandNorskNorwayPolskiPolandEspañolLatinoaméricaCatalàEspaña (Cataluña)हिन्दीIndiaSvenskaSwedenMaltiMaltaOʻzbekUzbekistanاردوPakistanNederlandsNetherlandsБългарскиBulgariaLatviešuLatviaDanskDenmarkRomânăRomaniaไทยThailandÍslenskaIcelandTiếng ViệtVietnamSlovenčinaSlovakiaУкраїнськаUkraineעבריתIsrael日本語JapanItalianoItalyPortuguêsPortugalРусскийRussiaKreyòl ayisyenHaitiČeštinaCzechiaGaeilgeIrelandবাংলাBangladeshTürkçeTürkiyeفارسیIranΕλληνικάGreeceBosanskiBosnia and HerzegovinaMelayuMalaysiaSlovenščinaSloveniaSrpskiSerbiaBahasa IndonesiaIndonesiaHrvatskiCroatia

Potential Transformers
& Power VTs

B2B
HomeProductsAI SpecAboutBlogContact

International Accreditation & Testing

Certified by KEMA Labs (Netherlands), CESI, and CNAS National HV Testing Facility

IEC 61869-3IEEE C57.13KEMA TYPE TESTEDISO 9001:2015ISO 14001:2015CE CERTIFIED
PotentialTransformers.com

Global B2B Instrument Transformer Portal

PotentialTransformers.com is an international OEM & EPC supplier specializing in cast epoxy resin dry-type instrument transformers (0.5kV to 35kV) — voltage transformers (VT/PT), current transformers (CT) and combined CT+VT units — for power utilities, switchgear builders and heavy industry.

100% Factory Partial Discharge Tested

Follow Us & Social Channels

FacebookLinkedInYouTubeInstagramTikTok

Product Categories

  • Voltage Transformers
  • Current Transformers
  • Combined Instrument Transformers

Engineering Tools

  • AI Data Center Series
  • AI Spec & Selection Studio
  • CT Burden Calculator
  • Cast-Resin Indoor VTs and CTs at 7.2–12 kV: Insulation, Partial Discharge and 0.2S Accuracy
  • Low-Voltage CTs at 0.66 kV: Busbar, Split-Core and What Class 0.5 Really Guarantees
  • High Voltage Faraday Lab Testing
  • Request Technical Datasheets

Global Support

  • Room 1602, 16/F, Wing On Centre, 111 Connaught Road Central, Sheung Wan, Central & Western District, Hong Kong
  • 86 18852046268
  • sales@potentialtransformers.com
  • Regional Hubs: Dubai, UAE | Frankfurt, Germany | Houston, USA

© 2026 PotentialTransformers.com. All Rights Reserved. Engineered for Global High-Voltage Grids.

IEC 61869-3 CompliantIEEE C57.13 CompliantKEMA Type Tested
HomeProductsCTKXLW-10G
KXLW-10G 10kV Outdoor Epoxy Cast Current Transformer for Metering & Protection
10kVKXLW-10G
Winding & Schematic TopologyInternal Wiring Diagram
Primary Winding (P1 - P2):Series-connected in the line / through-core — 10kV
Secondary Metering (1S1 - 1S2): ()
Secondary Protection (2S1 - 2S2):Protection winding (when fitted)
Safety Warning:Never open-circuit the secondary while energized — dangerous voltage
Current Transformer IEC 61869-3 Certified
Model Ref:KXLW-10G

KXLW-10G 10kV Outdoor Epoxy Cast Current Transformer for Metering & Protection

Outdoor split-core current transformer, 10kV, model KXLW-10G. Install directly on cables or conductors without cutting. Hot-line installation possible with HV cables. Outdoor resin casting, UV resistant, -40°C to +40°C. With open-circuit protection, creepage >500mm. Compliant with IEC 61869 and GB/T 20840 standards.

Key Engineering Advantages

  • 10kV outdoor split-core CT
  • hot-line installation
  • UV resistant
  • open-circuit protection
  • IEC compliant
Engineering Data

Complete Electrical & Mechanical Specifications

Model Ref: KXLW-10G

Electrical Parameters

Primary Rated Voltage (Un):10kV
Rated Frequency:50/60Hz

Insulation & Withstand Ratings

Insulation System:Dry Epoxy Resin
Insulation Level (BIL):12/42/75kV
Environmental Class:Ambient: -40°C ~ +40°C
Standards Conformance:IEC 61869, GB/T 20840
Partial Discharge Level:< 5 pC at 1.2 Un

Recommended Deployment Environments

GEO · Engineering Decision Support

Global Engineering Overview

9-Module selection guide
missing data = [On Request]

Product Decision Island

KXLW-10G is a 10kV outdoor split-core current transformer for metering and protection, suitable for hot-line installation on cables or conductors.

Comprehensive Spec Matrix

ParameterSpecificationVerification
Product TypeCurrent TransformerIEC 61869, GB/T 20840
Model CodeKXLW-10GFactory nameplate marking
Primary Voltage10kVRated voltage test (IEC 61869-1/3)
Secondary Current[On Request]Ratio check at rated frequency
Accuracy Class[On Request]Accuracy test (IEC 61869-2 / IEEE C57.13)
Rated Burden[On Request]Burden test at rated VA
Insulation TypeDry Epoxy ResinDielectric tests per standard
Insulation Level (BIL)12/42/75kVPower-frequency & lightning impulse withstand
StandardsIEC 61869, GB/T 20840Certified to listed standards
Frequency50/60HzPer IEC 61869-1
EnvironmentAmbient: -40°C ~ +40°CPer datasheet limits

Fit & Unfit Boundaries

Ideal For

  • Outdoor 10kV distribution networks
  • Metering and protection applications
  • Installation on existing cables without cutting
  • Hot-line installation on energized HV cables
  • Harsh outdoor environments with UV exposure

Not Recommended For

  • Indoor applications
  • Voltage transformation (PT) applications
  • Systems above 12kV maximum voltage
  • Environments exceeding -40°C to +40°C
  • Applications requiring high accuracy class 0.2S or 0.1

Topology & Wiring

Connect primary conductor through the split-core. Secondary terminals: 1S1 and 1S2 for metering winding; if dual-winding, protection winding uses 2S1 and 2S2. Never open-circuit the secondary of a CT while energized - hazardous voltage. Ground the secondary winding at one point. Follow IEC 61869-2 and GB/T 20840.2 terminal markings.

Standards & Compliance

Compliant with: IEC 61869, GB/T 20840

  • Type Test Report: [On Request]
  • Calibration Certificate: [On Request]

Burden & Error Calculation (IEEE C57.13)

S_total = ΣS_instrument + I₂² × (ρ × 2L / A)

  • If S_total < 0.25 × S_rated: add compensation burden to maintain accuracy.
  • If S_total > S_rated: accuracy class cannot be guaranteed.

Product FAQ

Q: What is the insulation level of KXLW-10G?

A: The insulation level is 12/42/75kV, meaning 12kV maximum system voltage, 42kV power-frequency withstand, and 75kV lightning impulse withstand.

Q: Can KXLW-10G be installed on live cables?

A: Yes, it is designed for hot-line installation on HV cables without cutting, thanks to its split-core design.

Q: What standards does KXLW-10G comply with?

A: It complies with IEC 61869 and GB/T 20840 standards.

Missing fields are marked [On Request] — never fabricated. M2/M5/M6 verification rows follow IEC 61869 / IEEE C57.13 conventions.

SPEC · TECHNICAL DATA

Technical Specifications

KXLW-10G
2 cols · 10 rows

KXLW-10G Outdoor Open-Type Current Transformer — Technical Data

ParameterValue
Product performance complies with standardsGB/T20840.1, 2 and IEC61869-1, 2
Rated insulation level12/42/75kV
Rated frequency50Hz or 60Hz
Ambient temperature-40℃~+40℃
AltitudeNot exceeding 3000 m
Rated primary current100~600A
Rated secondary current5A or 1A
Rated output2.5~5VA (with 2×2.5mm² cable10 m)
Creepage distance>500mm
with open-circuit protection—
Engineering Drawing

Specification & Outline Drawing

Dimension & outline drawing of KXLW-10G — click image to zoom / view original.

Product Overview

About This Product

KXLW-10G

In a 10kV outdoor distribution bay, pole-mounted enclosure or compact substation, this unit is the current transformer that steps primary current down to a metering or protection level. It is a dry epoxy resin cast, split-core CT rated 10kV with a 12/42/75kV insulation level, built for hot-line installation on existing conductors.

Factory routine testing includes ratio and polarity verification, with [On Request] for the full test report package. Primary current spans 100~600A and secondary is 5A or 1A, with rated output 2.5~5VA into a 2×2.5mm² cable of 10 metres. Creepage distance exceeds 500mm. Short-time thermal and dynamic capability data is [On Request]. Unlike fused designs, this unit carries no primary fuse, so protection coordination relies on the upstream scheme.

Compliance follows GB/T20840.1, 2 and IEC61869-1, 2; calibration certificates for trade-settlement metering are [On Request]. The UV-resistant housing suits outdoor lines and box substations from -40°C to +40°C at altitudes up to 3000m. Earth the secondary at one point and never open-circuit it while energized. DC or non-standard frequencies are not applicable. Custom ratios, classes and winding configurations are quoted on request.

Other Models in This Series

Same product family, different ratings — compare before you specify.

CGIS1911 Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1911

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1911 Current Transformer Applied to CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
CGIS1775 Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1775

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1775 Current Transformer Applied to CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
CGIS1780 I Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1780-I

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1780 I Current Transformer Applied to CGIS Gas Insulated Switchgear (CGIS1780-I) is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs