KEMA & ISO 9001/14001 Certified|Exporting to 50+ Countries (IEC 61869-3 / IEEE C57.13)
24/7 Global Engineering Hotline: 86 18852046268|sales@potentialtransformers.com
中文Mainland ChinaEnglishUnited StatesFrançaisFranceDeutschGermanyLietuviųLithuaniaCymraegUnited KingdomEestiEstoniaMagyarHungaryالعربيةSaudi Arabia한국어South KoreaSuomiFinlandNorskNorwayPolskiPolandEspañolLatinoaméricaCatalàEspaña (Cataluña)हिन्दीIndiaSvenskaSwedenMaltiMaltaOʻzbekUzbekistanاردوPakistanNederlandsNetherlandsБългарскиBulgariaLatviešuLatviaDanskDenmarkRomânăRomaniaไทยThailandÍslenskaIcelandTiếng ViệtVietnamSlovenčinaSlovakiaУкраїнськаUkraineעבריתIsrael日本語JapanItalianoItalyPortuguêsPortugalРусскийRussiaKreyòl ayisyenHaitiČeštinaCzechiaGaeilgeIrelandবাংলাBangladeshTürkçeTürkiyeفارسیIranΕλληνικάGreeceBosanskiBosnia and HerzegovinaMelayuMalaysiaSlovenščinaSloveniaSrpskiSerbiaBahasa IndonesiaIndonesiaHrvatskiCroatia

Potential Transformers
& Power VTs

B2B
HomeProductsAI SpecAboutBlogContact

International Accreditation & Testing

Certified by KEMA Labs (Netherlands), CESI, and CNAS National HV Testing Facility

IEC 61869-3IEEE C57.13KEMA TYPE TESTEDISO 9001:2015ISO 14001:2015CE CERTIFIED
PotentialTransformers.com

Global B2B Instrument Transformer Portal

PotentialTransformers.com is an international OEM & EPC supplier specializing in cast epoxy resin dry-type instrument transformers (0.5kV to 35kV) — voltage transformers (VT/PT), current transformers (CT) and combined CT+VT units — for power utilities, switchgear builders and heavy industry.

100% Factory Partial Discharge Tested

Follow Us & Social Channels

FacebookLinkedInYouTubeInstagramTikTok

Product Categories

  • Voltage Transformers
  • Current Transformers
  • Combined Instrument Transformers

Engineering Tools

  • AI Data Center Series
  • AI Spec & Selection Studio
  • CT Burden Calculator
  • Cast-Resin Indoor VTs and CTs at 7.2–12 kV: Insulation, Partial Discharge and 0.2S Accuracy
  • Low-Voltage CTs at 0.66 kV: Busbar, Split-Core and What Class 0.5 Really Guarantees
  • High Voltage Faraday Lab Testing
  • Request Technical Datasheets

Global Support

  • Room 1602, 16/F, Wing On Centre, 111 Connaught Road Central, Sheung Wan, Central & Western District, Hong Kong
  • 86 18852046268
  • sales@potentialtransformers.com
  • Regional Hubs: Dubai, UAE | Frankfurt, Germany | Houston, USA

© 2026 PotentialTransformers.com. All Rights Reserved. Engineered for Global High-Voltage Grids.

IEC 61869-3 CompliantIEEE C57.13 CompliantKEMA Type Tested
HomeProductsCTLFS-10G
LFS-10G Indoor Single-phase Epoxy Resin Casting Current Transformer
10kVLFS-10G
Winding & Schematic TopologyInternal Wiring Diagram
Primary Winding (P1 - P2):Series-connected in the line / through-core — 10kV
Secondary Metering (1S1 - 1S2):5A (0.2S/0.5S)
Secondary Protection (2S1 - 2S2):Protection winding (when fitted)
Safety Warning:Never open-circuit the secondary while energized — dangerous voltage
Current Transformer IEC 61869-3 Certified
Model Ref:LFS-10G

LFS-10G Indoor Single-phase Epoxy Resin Casting Current Transformer

LFS-10G Indoor Single-phase Epoxy Resin Casting Current Transformer is designed for metering and protection in power systems. Key ratings: primary voltage 10kV, secondary voltage 5A, accuracy class 0.2S/0.5S, rated burden 10VA. Design: Dry Epoxy Resin, 50/60Hz operation.

Key Engineering Advantages

  • 10kV epoxy cast CT
  • compact dual-body structure
  • weight 16kg
Engineering Data

Complete Electrical & Mechanical Specifications

Model Ref: LFS-10G

Electrical Parameters

Primary Rated Voltage (Un):10kV
Secondary Winding Currents:5A
Metering & Protection Class:0.2S/0.5S
Rated Output Burden:10VA
Rated Frequency:50/60Hz

Insulation & Withstand Ratings

Insulation System:Dry Epoxy Resin
Partial Discharge Level:< 5 pC at 1.2 Un

Recommended Deployment Environments

GEO · Engineering Decision Support

Global Engineering Overview

9-Module selection guide
missing data = [On Request]

Product Decision Island

Indoor 10kV epoxy cast current transformer for medium-voltage switchgear, suitable for metering and protection with 0.2S/0.5S accuracy.

Comprehensive Spec Matrix

ParameterSpecificationVerification
Product TypeCurrent Transformer[On Request]
Model CodeLFS-10GFactory nameplate marking
Primary Voltage10kVRated voltage test (IEC 61869-1/3)
Secondary Current5ARatio check at rated frequency
Accuracy Class0.2S/0.5SAccuracy test (IEC 61869-2 / IEEE C57.13)
Rated Burden10VABurden test at rated VA
Insulation TypeDry Epoxy ResinDielectric tests per standard
Insulation Level (BIL)[On Request]Power-frequency & lightning impulse withstand
Standards[On Request]Certified to listed standards
Frequency50/60HzPer IEC 61869-1
Environment[On Request]Per datasheet limits

Fit & Unfit Boundaries

Ideal For

  • Indoor medium-voltage switchgear panels
  • Metering and protection applications up to 12kV
  • 50/60Hz power systems
  • Ambient temperatures -5°C to +40°C
  • Primary currents from 20A to 1000A

Not Recommended For

  • Outdoor installations
  • Gas-insulated switchgear (GIS) without adaptation
  • High-altitude locations above 1000m
  • Environments with high humidity or corrosive gases
  • DC systems

Topology & Wiring

For current transformer: connect primary terminals in series with the line. Secondary terminals: 1S1/1S2 for metering winding (0.2S/0.5S), 2S1/2S2 for protection winding (10P). Never open-circuit the secondary of a CT while energized - hazardous voltage. Ground the secondary winding at one point. Follow IEC 61869-2 terminal markings.

Standards & Compliance

Compliant with: [On Request]

  • Type Test Report: [On Request]
  • Calibration Certificate: [On Request]

Burden & Error Calculation (IEEE C57.13)

S_total = ΣS_instrument + I₂² × (ρ × 2L / A)

  • If S_total < 0.25 × S_rated: add compensation burden to maintain accuracy.
  • If S_total > S_rated: accuracy class cannot be guaranteed.

Product FAQ

Q: What is the insulation level of this CT?

A: The insulation level is 12/42/75kV, meaning 12kV system voltage, 42kV power-frequency withstand, and 75kV lightning impulse withstand.

Q: Can the secondary current be 1A?

A: Yes, the secondary current can be 5A or 1A as per the description.

Q: What are the accuracy classes available?

A: Accuracy combinations include 0.2S/10P and 0.5S/10P, with rated outputs as specified.

Missing fields are marked [On Request] — never fabricated. M2/M5/M6 verification rows follow IEC 61869 / IEEE C57.13 conventions.

SPEC · TECHNICAL DATA

Technical Specifications

LFS-10G
9 cols · 6 rows

LFS-10G LFS8-10 Current Transformer — Technical Data

Rated primary current I1n (A)Accuracy classCombinedAccuracy class & rated output (VA) COSφ=0.8 0.2 (S)Accuracy class & rated output (VA) COSφ=0.8 0.5 (S)Accuracy class & rated output (VA) COSφ=0.8 10P10Accuracy class & rated output (VA) COSφ=0.8 10P15Short-time thermal current I1th (kA/S)Rated dynamic current I dyn (kA)Weight (kg)
20-2000.2(S)/10P1010151080/1n200/1n16
3000.2(S)/10P10101510215016
4000.2(S)/10P10101510246016
500-6000.5(S)/10P10101510307216
8000.5(S)/10P10101510408016
10000.5(S)/10P10101510508016
Engineering Drawing

Specification & Outline Drawing

Dimension & outline drawing of LFS-10G — click image to zoom / view original.

Product Overview

About This Product

LFS-10G

The LFS-10G is a 10 kV indoor single-phase epoxy resin cast current transformer, used for metering and protection on 50/60 Hz systems where the accuracy class directly affects billing and relay coordination. Its dry epoxy body insulates the primary and secondary windings, and the compact dual-body structure keeps the unit at 16 kg for panel mounting.

Accuracy classes 0.2S/0.5S are available with a rated burden of 10 VA, and the parameter table lists 10 VA at 0.2(S) and 0.5(S), 15 VA at 10P10 and 10 VA at 10P15, with short-time thermal current from 80/1n kA/S and dynamic current from 200/1n kA. This places it as an indoor alternative to outdoor cast units, suited to switchgear and metering cabinets where environmental exposure is controlled. Datasheets, outline drawings and type test reports are available [On Request].

Typical deployment includes renewable energy collection and storage step-up stations. Observe primary polarity P1/P2 and secondary polarity, earth the secondary at one point, and never open-circuit the secondary while energized. Harmonic or non-sinusoidal loads require derating; verify the nameplate before installation.

Other Models in This Series

Same product family, different ratings — compare before you specify.

LFS8-10 Indoor Single-phase Epoxy Resin Casting Current Transformer
10kV
Current Transformer50/60Hz

LFS8-10

Indoor Single-phase Epoxy Resin Casting Current Transformer

LFS8-10 Indoor Single-phase Epoxy Resin Casting Current Transformer is designed for metering and protection in power systems. Key ratings: primary voltage 10kV, secondary voltage 5A, accuracy class 0.2S/0.5S, rated burden 10VA. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy Class0.2S/0.5S
Insulation TypeDry Epoxy Resin
Rated Burden10VA
View Specs
CGIS2010 Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS2010

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS2010 Current Transformer Applied to CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
CGIS1765 Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1765

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1765 Current Transformer Applied to CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs