KEMA & ISO 9001/14001 Certified|Exporting to 50+ Countries (IEC 61869-3 / IEEE C57.13)
24/7 Global Engineering Hotline: 86 18852046268|sales@potentialtransformers.com
中文Mainland ChinaEnglishUnited StatesFrançaisFranceDeutschGermanyLietuviųLithuaniaCymraegUnited KingdomEestiEstoniaMagyarHungaryالعربيةSaudi Arabia한국어South KoreaSuomiFinlandNorskNorwayPolskiPolandEspañolLatinoaméricaCatalàEspaña (Cataluña)हिन्दीIndiaSvenskaSwedenMaltiMaltaOʻzbekUzbekistanاردوPakistanNederlandsNetherlandsБългарскиBulgariaLatviešuLatviaDanskDenmarkRomânăRomaniaไทยThailandÍslenskaIcelandTiếng ViệtVietnamSlovenčinaSlovakiaУкраїнськаUkraineעבריתIsrael日本語JapanItalianoItalyPortuguêsPortugalРусскийRussiaKreyòl ayisyenHaitiČeštinaCzechiaGaeilgeIrelandবাংলাBangladeshTürkçeTürkiyeفارسیIranΕλληνικάGreeceBosanskiBosnia and HerzegovinaMelayuMalaysiaSlovenščinaSloveniaSrpskiSerbiaBahasa IndonesiaIndonesiaHrvatskiCroatia

Potential Transformers
& Power VTs

B2B
HomeProductsAI SpecAboutBlogContact

International Accreditation & Testing

Certified by KEMA Labs (Netherlands), CESI, and CNAS National HV Testing Facility

IEC 61869-3IEEE C57.13KEMA TYPE TESTEDISO 9001:2015ISO 14001:2015CE CERTIFIED
PotentialTransformers.com

Global B2B Instrument Transformer Portal

PotentialTransformers.com is an international OEM & EPC supplier specializing in cast epoxy resin dry-type instrument transformers (0.5kV to 35kV) — voltage transformers (VT/PT), current transformers (CT) and combined CT+VT units — for power utilities, switchgear builders and heavy industry.

100% Factory Partial Discharge Tested

Follow Us & Social Channels

FacebookLinkedInYouTubeInstagramTikTok

Product Categories

  • Voltage Transformers
  • Current Transformers
  • Combined Instrument Transformers

Engineering Tools

  • AI Data Center Series
  • AI Spec & Selection Studio
  • CT Burden Calculator
  • Cast-Resin Indoor VTs and CTs at 7.2–12 kV: Insulation, Partial Discharge and 0.2S Accuracy
  • Low-Voltage CTs at 0.66 kV: Busbar, Split-Core and What Class 0.5 Really Guarantees
  • High Voltage Faraday Lab Testing
  • Request Technical Datasheets

Global Support

  • Room 1602, 16/F, Wing On Centre, 111 Connaught Road Central, Sheung Wan, Central & Western District, Hong Kong
  • 86 18852046268
  • sales@potentialtransformers.com
  • Regional Hubs: Dubai, UAE | Frankfurt, Germany | Houston, USA

© 2026 PotentialTransformers.com. All Rights Reserved. Engineered for Global High-Voltage Grids.

IEC 61869-3 CompliantIEEE C57.13 CompliantKEMA Type Tested
HomeProductsCTLMZ9-10
LMZ9-10 10kV Indoor Epoxy Cast Busbar-Type Single-Phase Current Transformer for Switchgear
10kVLMZ9-10
Winding & Schematic TopologyInternal Wiring Diagram
Primary Winding (P1 - P2):Series-connected in the line / through-core — 10kV
Secondary Metering (1S1 - 1S2):5A or 1A ()
Secondary Protection (2S1 - 2S2):Protection winding (when fitted)
Safety Warning:Never open-circuit the secondary while energized — dangerous voltage
Current Transformer IEC 61869-3 Certified
Model Ref:LMZ9-10

LMZ9-10 10kV Indoor Epoxy Cast Busbar-Type Single-Phase Current Transformer for Switchgear

10kV indoor busbar-type epoxy resin cast current transformer. Through-core design for easy installation on busbars. Rated insulation level 12/42/75kV, 50/60Hz, secondary current 5A or 1A. Compliant with IEC 61869 and GB/T 20840 standards. Vacuum epoxy casting process, low partial discharge, reliable performance. Suitable for medium voltage switchgear, customizable ratio and accuracy.

Key Engineering Advantages

  • 10kV busbar-type current transformer
  • through-core design
  • epoxy cast
  • IEC 61869 compliant
  • easy installation
Engineering Data

Complete Electrical & Mechanical Specifications

Model Ref: LMZ9-10

Electrical Parameters

Primary Rated Voltage (Un):10kV
Secondary Winding Currents:5A or 1A
Rated Frequency:50/60Hz

Insulation & Withstand Ratings

Insulation System:Dry Epoxy Resin
Insulation Level (BIL):12/42/75kV
Environmental Class:Indoor busbar-type epoxy resin cast
Standards Conformance:IEC 61869, GB/T 20840
Partial Discharge Level:< 5 pC at 1.2 Un

Recommended Deployment Environments

Medium voltage switchgear
GEO · Engineering Decision Support

Global Engineering Overview

9-Module selection guide
missing data = [On Request]

Product Decision Island

LMZ9-10 is a 10kV indoor busbar-type current transformer with epoxy cast insulation, suitable for medium voltage switchgear applications.

Comprehensive Spec Matrix

ParameterSpecificationVerification
Product TypeCurrent TransformerIEC 61869, GB/T 20840
Model CodeLMZ9-10Factory nameplate marking
Primary Voltage10kVRated voltage test (IEC 61869-1/3)
Secondary Current5A or 1ARatio check at rated frequency
Accuracy Class[On Request]Accuracy test (IEC 61869-2 / IEEE C57.13)
Rated Burden[On Request]Burden test at rated VA
Insulation TypeDry Epoxy ResinDielectric tests per standard
Insulation Level (BIL)12/42/75kVPower-frequency & lightning impulse withstand
StandardsIEC 61869, GB/T 20840Certified to listed standards
Frequency50/60HzPer IEC 61869-1
EnvironmentIndoor busbar-type epoxy resin castPer datasheet limits

Fit & Unfit Boundaries

Ideal For

  • 10kV indoor switchgear panels
  • Busbar current measurement and protection
  • Metering and relay applications in MV networks
  • Retrofit installations where through-core design is required

Not Recommended For

  • Outdoor installations without additional protection
  • Gas-insulated switchgear (GIS) due to busbar-type design
  • High voltage systems above 12kV
  • Applications requiring very high accuracy class (e.g., 0.1S) not specified

Topology & Wiring

For current transformer (CT) wiring: Connect primary busbar through the window. Secondary terminals are 1S1 and 1S2 for the main winding; if dual ratio, additional taps may be present. Ensure secondary is never open-circuited while energized - hazardous voltage can occur. Ground the secondary circuit at one point only, preferably at the CT terminal box, to ensure safety and proper operation. Follow IEC 61869-2 and IEEE C57.13 for terminal markings and connections.

Standards & Compliance

Compliant with: IEC 61869, GB/T 20840

  • Type Test Report: [On Request]
  • Calibration Certificate: [On Request]

Burden & Error Calculation (IEEE C57.13)

S_total = ΣS_instrument + I₂² × (ρ × 2L / A)

  • If S_total < 0.25 × S_rated: add compensation burden to maintain accuracy.
  • If S_total > S_rated: accuracy class cannot be guaranteed.

Product FAQ

Q: What is the insulation level of LMZ9-10?

A: The insulation level is 12/42/75kV, meaning 12kV system voltage, 42kV power-frequency withstand, and 75kV lightning impulse withstand.

Q: Can LMZ9-10 be used outdoors?

A: No, it is designed for indoor use only. Outdoor installation would require additional weatherproofing.

Q: What are the secondary current options?

A: The secondary current can be 5A or 1A, as specified.

Missing fields are marked [On Request] — never fabricated. M2/M5/M6 verification rows follow IEC 61869 / IEEE C57.13 conventions.

SPEC · TECHNICAL DATA

Technical Specifications

LMZ9-10
6 cols · 1 rows

LMZ9-10 Current Transformer

Rated primary current (A)Accuracy classCombinedAccuracy class & rated output (VA) COSφ=0.8 (0.2 (S))Accuracy class & rated output (VA) COSφ=0.8 (0.5 (S))Accuracy class & rated output (VA) COSφ=0.8 (5 (10)P10)Weight (kg)
400~8000.2(S) 0.5(S) 5(10)P103VA3VA2VA5
Engineering Drawing

Specification & Outline Drawing

Dimension & outline drawing of LMZ9-10 — click image to zoom / view original.

Product Overview

About This Product

LMZ9-10

The LMZ9-10 is a 10 kV indoor busbar-type single-phase current transformer intended for metering and protection duties in medium voltage switchgear, where its accuracy class directly supports fair energy settlement. The through-core, epoxy resin cast construction provides dry insulation, and each unit is routine-tested at the factory for ratio and polarity before dispatch.

With a 5 A or 1 A secondary, the LMZ9-10 offers accuracy classes 0.2(S) and 0.5(S) at 3 VA, plus 5(10)P10 at 2 VA, maintaining defined error limits from light load to full load. It complies with IEC 61869 and GB/T 20840, and a datasheet, outline drawing and test report are available [On Request]. Typical deployment covers heavy-industry distribution in metallurgy, mining, cement and chemical plants, always indoors.

Secondary terminals are marked per the nameplate; earth the secondary at one point and never open-circuit it while energized. The unit is not suitable for DC or non-standard frequencies. OEM branding and customized ratios or classes can be quoted, with a document package supplied with each delivery.

Other Models in This Series

Same product family, different ratings — compare before you specify.

CGIS1911 Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1911

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1911 Current Transformer Applied to CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
CGIS1775 Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1775

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1775 Current Transformer Applied to CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
CGIS1780 I Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1780-I

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1780 I Current Transformer Applied to CGIS Gas Insulated Switchgear (CGIS1780-I) is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs