KEMA & ISO 9001/14001 Certified|Exporting to 50+ Countries (IEC 61869-3 / IEEE C57.13)
24/7 Global Engineering Hotline: 86 18852046268|sales@potentialtransformers.com
中文Mainland ChinaEnglishUnited StatesFrançaisFranceDeutschGermanyLietuviųLithuaniaCymraegUnited KingdomEestiEstoniaMagyarHungaryالعربيةSaudi Arabia한국어South KoreaSuomiFinlandNorskNorwayPolskiPolandEspañolLatinoaméricaCatalàEspaña (Cataluña)हिन्दीIndiaSvenskaSwedenMaltiMaltaOʻzbekUzbekistanاردوPakistanNederlandsNetherlandsБългарскиBulgariaLatviešuLatviaDanskDenmarkRomânăRomaniaไทยThailandÍslenskaIcelandTiếng ViệtVietnamSlovenčinaSlovakiaУкраїнськаUkraineעבריתIsrael日本語JapanItalianoItalyPortuguêsPortugalРусскийRussiaKreyòl ayisyenHaitiČeštinaCzechiaGaeilgeIrelandবাংলাBangladeshTürkçeTürkiyeفارسیIranΕλληνικάGreeceBosanskiBosnia and HerzegovinaMelayuMalaysiaSlovenščinaSloveniaSrpskiSerbiaBahasa IndonesiaIndonesiaHrvatskiCroatia

Potential Transformers
& Power VTs

B2B
HomeProductsAI SpecAboutBlogContact

International Accreditation & Testing

Certified by KEMA Labs (Netherlands), CESI, and CNAS National HV Testing Facility

IEC 61869-3IEEE C57.13KEMA TYPE TESTEDISO 9001:2015ISO 14001:2015CE CERTIFIED
PotentialTransformers.com

Global B2B Instrument Transformer Portal

PotentialTransformers.com is an international OEM & EPC supplier specializing in cast epoxy resin dry-type instrument transformers (0.5kV to 35kV) — voltage transformers (VT/PT), current transformers (CT) and combined CT+VT units — for power utilities, switchgear builders and heavy industry.

100% Factory Partial Discharge Tested

Follow Us & Social Channels

FacebookLinkedInYouTubeInstagramTikTok

Product Categories

  • Voltage Transformers
  • Current Transformers
  • Combined Instrument Transformers

Engineering Tools

  • AI Data Center Series
  • AI Spec & Selection Studio
  • CT Burden Calculator
  • Cast-Resin Indoor VTs and CTs at 7.2–12 kV: Insulation, Partial Discharge and 0.2S Accuracy
  • Low-Voltage CTs at 0.66 kV: Busbar, Split-Core and What Class 0.5 Really Guarantees
  • High Voltage Faraday Lab Testing
  • Request Technical Datasheets

Global Support

  • Room 1602, 16/F, Wing On Centre, 111 Connaught Road Central, Sheung Wan, Central & Western District, Hong Kong
  • 86 18852046268
  • sales@potentialtransformers.com
  • Regional Hubs: Dubai, UAE | Frankfurt, Germany | Houston, USA

© 2026 PotentialTransformers.com. All Rights Reserved. Engineered for Global High-Voltage Grids.

IEC 61869-3 CompliantIEEE C57.13 CompliantKEMA Type Tested
HomeProductsCTLMZB3-10GWD-E
LMZB3-10GWD,E 10kV Indoor Through-Core Epoxy Cast Current Transformer
10kVLMZB3-10GWD-E
Winding & Schematic TopologyInternal Wiring Diagram
Primary Winding (P1 - P2):Series-connected in the line / through-core — 10kV
Secondary Metering (1S1 - 1S2):5A or 1A (0.2S, 0.5, 5P20, 5P30)
Secondary Protection (2S1 - 2S2):Protection winding (when fitted)
Safety Warning:Never open-circuit the secondary while energized — dangerous voltage
Current Transformer IEC 61869-3 Certified
Model Ref:LMZB3-10GWD-E

LMZB3-10GWD,E 10kV Indoor Through-Core Epoxy Cast Current Transformer

LMZB3-10GWD,E 10kV Indoor Through-Core Epoxy Cast Current Transformer (LMZB3-10GWD-E) is designed for metering and protection in power systems. Key ratings: primary voltage 10kV, secondary voltage 5A or 1A, accuracy class 0.2S, 0.5, 5P20, 5P30. Design: insulation level 12/42/75kV, Dry Epoxy Resin, 50/60Hz operation. Conforms to IEC 61869, GB/T 20840.

Key Engineering Advantages

  • 12kV busbar-type through-core CT
  • dual windings
  • IEC 61869 compliant
  • low partial discharge
  • easy busbar installation
Engineering Data

Complete Electrical & Mechanical Specifications

Model Ref: LMZB3-10GWD-E

Electrical Parameters

Primary Rated Voltage (Un):10kV
Secondary Winding Currents:5A or 1A
Metering & Protection Class:0.2S, 0.5, 5P20, 5P30
Rated Frequency:50/60Hz

Insulation & Withstand Ratings

Insulation System:Dry Epoxy Resin
Insulation Level (BIL):12/42/75kV
Environmental Class:Indoor busbar-type through-core epoxy cast
Standards Conformance:IEC 61869, GB/T 20840
Partial Discharge Level:< 5 pC at 1.2 Un

Recommended Deployment Environments

Medium voltage switchgear busbar
GEO · Engineering Decision Support

Global Engineering Overview

9-Module selection guide
missing data = [On Request]

Product Decision Island

12kV indoor busbar-type CT with dual windings for metering and protection, suitable for MV switchgear busbar applications.

Comprehensive Spec Matrix

ParameterSpecificationVerification
Product TypeCurrent TransformerIEC 61869, GB/T 20840
Model CodeLMZB3-10GWD-EFactory nameplate marking
Primary Voltage10kVRated voltage test (IEC 61869-1/3)
Secondary Current5A or 1ARatio check at rated frequency
Accuracy Class0.2S, 0.5, 5P20, 5P30Accuracy test (IEC 61869-2 / IEEE C57.13)
Rated Burden[On Request]Burden test at rated VA
Insulation TypeDry Epoxy ResinDielectric tests per standard
Insulation Level (BIL)12/42/75kVPower-frequency & lightning impulse withstand
StandardsIEC 61869, GB/T 20840Certified to listed standards
Frequency50/60HzPer IEC 61869-1
EnvironmentIndoor busbar-type through-core epoxy castPer datasheet limits

Fit & Unfit Boundaries

Ideal For

  • Indoor medium voltage switchgear busbar metering
  • Protection schemes requiring 5P20 or 5P30 accuracy
  • Revenue metering with 0.2S accuracy
  • 50/60Hz systems
  • Dry, indoor environments

Not Recommended For

  • Outdoor installations
  • High voltage transmission systems above 12kV
  • Gas-insulated switchgear (GIS) without proper adaptation
  • Cable-type applications (requires through-core design)
  • DC systems

Topology & Wiring

Connect secondary terminals 1S1/1S2 for metering winding and 2S1/2S2 for protection winding. Never open-circuit the secondary of a CT while energized - hazardous voltage. Ground the secondary winding at one point. Ensure polarity markings are observed for proper relay operation.

Standards & Compliance

Compliant with: IEC 61869, GB/T 20840

  • Type Test Report: [On Request]
  • Calibration Certificate: [On Request]

Burden & Error Calculation (IEEE C57.13)

S_total = ΣS_instrument + I₂² × (ρ × 2L / A)

  • If S_total < 0.25 × S_rated: add compensation burden to maintain accuracy.
  • If S_total > S_rated: accuracy class cannot be guaranteed.

Product FAQ

Q: What is the insulation level of this CT?

A: The insulation level is 12/42/75kV, meaning 12kV system voltage, 42kV power-frequency withstand, and 75kV lightning impulse withstand.

Q: Can this CT be used for both metering and protection?

A: Yes, it has dual windings with accuracy classes 0.2S/0.5 for metering and 5P20/5P30 for protection.

Q: Is this CT suitable for outdoor use?

A: No, it is designed for indoor use only, as indicated by 'Indoor' in the product name.

Missing fields are marked [On Request] — never fabricated. M2/M5/M6 verification rows follow IEC 61869 / IEEE C57.13 conventions.

SPEC · TECHNICAL DATA

Technical Specifications

LMZB3-10GWD-E
9 cols · 15 rows

LZZBJ9-10GWA, B, C LMZB3-10GWD, E — Technical Data

Rated primary current I1n (A)Accuracy classCombinedRated output (VA) 0.2 classRated output (VA) 0.5 classRated output (VA) 5P20 classRated output (VA) 0.2S classRated output (VA) 5P30 classRated output (VA) 0.5S classModel
50E0.2/0.5/5P20//10/10/LZZBJ9-10GWA
100E0.2/0.5/5P20101010/10/LZZBJ9-10GWA
0.2/0.5/5P20101010/10/LZZBJ9-10GWB
200E0.2/0.5/5P20101020/20/LZZBJ9-10GWB
0.2/0.5/5P20101020/20/LZZBJ9-10GWC
300E0.2/0.5/5P20101020/20/LZZBJ9-10GWC
400E0.2/0.5/5P20151520/20/LZZBJ9-10GWC
600E0.2/0.5/5P20151520/20/LZZBJ9-10GWC
800E0.2/0.5/5P20151520/20/LZZBJ9-10GWC
1000-2500E0.2/0.5/5P20151520/20/LZZBJ9-10GWC
0.2/0.5/5P20151520/20/LZZBJ9-10GWC
1200-2500E0.2/0.5/5P20202020/20/LZZBJ9-10GWC
0.2/0.5/5P20202020/20/LZZBJ9-10GWC
3000-4000E0.2/0.5/5P20202020/20/LMZB3-10GWD
0.2/0.5/5P20202020/20/LMZB3-10GWE
Engineering Drawing

Specification & Outline Drawing

Dimension & outline drawing of LMZB3-10GWD-E — click image to zoom / view original.

Product Overview

About This Product

LMZB3-10GWD-E

This is a 10kV indoor through-core current transformer using dry epoxy resin insulation, a construction that removes oil handling and supports busbar-type primary routing in medium voltage switchgear. The dual-winding architecture separates metering from protection duties, and the epoxy cast body is built for indoor busbar installation.

Accuracy classes 0.2S, 0.5, 5P20 and 5P30 are available with rated burdens of 10VA, 15VA and 20VA, at 50/60Hz. The insulation level is 12/42/75kV, and the unit is designed to IEC 61869 and GB/T 20840. For the 3000-4000E primary current range, the 0.2/0.5/5P20 combination provides 20VA on each of those classes. Short-time thermal and dynamic withstand figures are [On Request].

Because it is an indoor device, deployment belongs in medium voltage switchgear busbar compartments, including heavy industrial distribution in metallurgy, mining, cement and chemical plants. Never open-circuit the secondary while energized. Earth the secondary at one point and follow the nameplate terminal diagram. Ratio, accuracy class and winding configuration can be customized, with documentation and test evidence supplied on request.

Other Models in This Series

Same product family, different ratings — compare before you specify.

LMZB3-10Q Indoor Single-phase Epoxy Resin Casting Current Transformer
10kV
Current Transformer50/60Hz

LMZB3-10Q

Indoor Single-phase Epoxy Resin Casting Current Transformer

Indoor single-phase epoxy resin casting current transformer complying with GB/T20840.1/2 and IEC61869-1/2 standards, insulation level 12/42/75kV, rated frequency 50/60Hz, secondary rated current 5A or 1A. Optional primary current ranges:1000-1200A、1500A、2000-6000A; multiple accuracy combinations like 0.2S/0.5S、0.2S/10P15、10P15/10P15、0.5S/10P15, rated output values 15VA/20VA/30VA for different grades, net weight 30kg, ambient operating temperature -5℃~+40℃.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
LMZB3-10G Indoor Single-phase Epoxy Resin Casting Current Transformer
10kV
Current Transformer50/60Hz

LMZB3-10G

Indoor Single-phase Epoxy Resin Casting Current Transformer

Indoor single-phase epoxy resin casting current transformer complying with GB/T20840.1/2 and IEC61869-1/2 standards, insulation level 12/42/75kV, rated frequency 50/60Hz, secondary rated current 5A or 1A. Optional primary current ranges:1000-1500A、2000-3000A、4000-6000A; accuracy combinations including 0.2S/0.2S、0.2S/0.5S、0.2S/10P15/10P15、0.5S/10P15/10P15, rated output values 15VA/20VA/30VA corresponding to different accuracy grades, net weight 45kg, ambient operating temperature -5℃~+40℃.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
CGIS2070 I Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS2070-I

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS2070 I is an indoor epoxy resin casting current transformer designed for CGIS gas-insulated switchgear at 35kV. It is available with accuracy classes 0.2FS10, 0.5SFS10, 5P10, 10P10, 5P20 and 10P20. The epoxy casting has an outer diameter of Ø205mm and a through (inner) diameter of Ø70mm for busbar installation, and is rated for 50/60Hz operation. Metering classes (0.2FS10, 0.5SFS10) and protection classes (5P10, 10P10, 5P20, 10P20) cover both measurement and relay protection inside CGIS panels.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs