KEMA & ISO 9001/14001 Certified|Exporting to 50+ Countries (IEC 61869-3 / IEEE C57.13)
24/7 Global Engineering Hotline: 86 18852046268|sales@potentialtransformers.com
中文Mainland ChinaEnglishUnited StatesFrançaisFranceDeutschGermanyLietuviųLithuaniaCymraegUnited KingdomEestiEstoniaMagyarHungaryالعربيةSaudi Arabia한국어South KoreaSuomiFinlandNorskNorwayPolskiPolandEspañolLatinoaméricaCatalàEspaña (Cataluña)हिन्दीIndiaSvenskaSwedenMaltiMaltaOʻzbekUzbekistanاردوPakistanNederlandsNetherlandsБългарскиBulgariaLatviešuLatviaDanskDenmarkRomânăRomaniaไทยThailandÍslenskaIcelandTiếng ViệtVietnamSlovenčinaSlovakiaУкраїнськаUkraineעבריתIsrael日本語JapanItalianoItalyPortuguêsPortugalРусскийRussiaKreyòl ayisyenHaitiČeštinaCzechiaGaeilgeIrelandবাংলাBangladeshTürkçeTürkiyeفارسیIranΕλληνικάGreeceBosanskiBosnia and HerzegovinaMelayuMalaysiaSlovenščinaSloveniaSrpskiSerbiaBahasa IndonesiaIndonesiaHrvatskiCroatia

Potential Transformers
& Power VTs

B2B
HomeProductsAI SpecAboutBlogContact

International Accreditation & Testing

Certified by KEMA Labs (Netherlands), CESI, and CNAS National HV Testing Facility

IEC 61869-3IEEE C57.13KEMA TYPE TESTEDISO 9001:2015ISO 14001:2015CE CERTIFIED
PotentialTransformers.com

Global B2B Instrument Transformer Portal

PotentialTransformers.com is an international OEM & EPC supplier specializing in cast epoxy resin dry-type instrument transformers (0.5kV to 35kV) — voltage transformers (VT/PT), current transformers (CT) and combined CT+VT units — for power utilities, switchgear builders and heavy industry.

100% Factory Partial Discharge Tested

Follow Us & Social Channels

FacebookLinkedInYouTubeInstagramTikTok

Product Categories

  • Voltage Transformers
  • Current Transformers
  • Combined Instrument Transformers

Engineering Tools

  • AI Data Center Series
  • AI Spec & Selection Studio
  • CT Burden Calculator
  • Cast-Resin Indoor VTs and CTs at 7.2–12 kV: Insulation, Partial Discharge and 0.2S Accuracy
  • Low-Voltage CTs at 0.66 kV: Busbar, Split-Core and What Class 0.5 Really Guarantees
  • High Voltage Faraday Lab Testing
  • Request Technical Datasheets

Global Support

  • Room 1602, 16/F, Wing On Centre, 111 Connaught Road Central, Sheung Wan, Central & Western District, Hong Kong
  • 86 18852046268
  • sales@potentialtransformers.com
  • Regional Hubs: Dubai, UAE | Frankfurt, Germany | Houston, USA

© 2026 PotentialTransformers.com. All Rights Reserved. Engineered for Global High-Voltage Grids.

IEC 61869-3 CompliantIEEE C57.13 CompliantKEMA Type Tested
HomeProductsCTLMZJ1-0.66W
LMZJ1-0.66W 0.66kV Outdoor Epoxy Cast Busbar-Type Current Transformer for Low Voltage Metering
0.66kVLMZJ1-0.66W
Winding & Schematic TopologyInternal Wiring Diagram
Primary Winding (P1 - P2):Series-connected in the line / through-core — 0.66kV
Secondary Metering (1S1 - 1S2): ()
Secondary Protection (2S1 - 2S2):Protection winding (when fitted)
Safety Warning:Never open-circuit the secondary while energized — dangerous voltage
Current Transformer IEC 61869-3 Certified
Model Ref:LMZJ1-0.66W

LMZJ1-0.66W 0.66kV Outdoor Epoxy Cast Busbar-Type Current Transformer for Low Voltage Metering

Outdoor busbar-type current transformer, rated voltage 0.66kV. Designed for low voltage outdoor distribution systems. Rated frequency 50Hz or 60Hz. Ambient temperature range -25°C to +40°C. Compliant with IEC 61869 and GB/T 20840 standards. Outdoor design with weather-resistant construction. Busbar through-core installation, easy to mount on low voltage busbars. Used for current measurement and protection in LV systems.

Key Engineering Advantages

  • 0.66kV outdoor busbar CT
  • through-core design
  • weather-resistant
  • IEC 61869 compliant
  • LV system
Engineering Data

Complete Electrical & Mechanical Specifications

Model Ref: LMZJ1-0.66W

Electrical Parameters

Primary Rated Voltage (Un):0.66kV
Rated Frequency:50/60Hz

Insulation & Withstand Ratings

Insulation System:Dry Epoxy Resin
Environmental Class:Outdoor busbar-type through-core; Ambient: -25°C ~ +40°C
Standards Conformance:IEC 61869, GB/T 20840
Partial Discharge Level:< 5 pC at 1.2 Un

Recommended Deployment Environments

Low voltage outdoor distribution
GEO · Engineering Decision Support

Global Engineering Overview

9-Module selection guide
missing data = [On Request]

Product Decision Island

Outdoor busbar-type CT for 0.66kV LV systems; suitable for metering and protection in outdoor distribution.

Comprehensive Spec Matrix

ParameterSpecificationVerification
Product TypeCurrent TransformerIEC 61869, GB/T 20840
Model CodeLMZJ1-0.66WFactory nameplate marking
Primary Voltage0.66kVRated voltage test (IEC 61869-1/3)
Secondary Current[On Request]Ratio check at rated frequency
Accuracy Class[On Request]Accuracy test (IEC 61869-2 / IEEE C57.13)
Rated Burden[On Request]Burden test at rated VA
Insulation TypeDry Epoxy ResinDielectric tests per standard
Insulation Level (BIL)[On Request]Power-frequency & lightning impulse withstand
StandardsIEC 61869, GB/T 20840Certified to listed standards
Frequency50/60HzPer IEC 61869-1
EnvironmentOutdoor busbar-type through-core; Ambient: -25°C ~ +40°CPer datasheet limits

Fit & Unfit Boundaries

Ideal For

  • Outdoor low voltage distribution panels
  • Busbar current measurement in LV switchgear
  • Metering and protection in 0.66kV systems
  • Installations requiring weather-resistant CTs

Not Recommended For

  • Indoor applications
  • High voltage systems above 1kV
  • Cable-type installations (not busbar)
  • High accuracy metering (if not specified)

Topology & Wiring

connect secondary terminals 1S1 and 1S2 for metering; if a protection winding exists, use 2S1-2S2. Never open-circuit the secondary of a CT while energized - hazardous voltage. Ground the secondary circuit at one point only.

Standards & Compliance

Compliant with: IEC 61869, GB/T 20840

  • Type Test Report: [On Request]
  • Calibration Certificate: [On Request]

Burden & Error Calculation (IEEE C57.13)

S_total = ΣS_instrument + I₂² × (ρ × 2L / A)

  • If S_total < 0.25 × S_rated: add compensation burden to maintain accuracy.
  • If S_total > S_rated: accuracy class cannot be guaranteed.

Product FAQ

Q: What is the rated voltage of this CT?

A: 0.66kV.

Q: Is it suitable for outdoor installation?

A: Yes, it is designed for outdoor use with weather-resistant construction.

Q: What standards does it comply with?

A: IEC 61869 and GB/T 20840.

Missing fields are marked [On Request] — never fabricated. M2/M5/M6 verification rows follow IEC 61869 / IEEE C57.13 conventions.

SPEC · TECHNICAL DATA

Technical Specifications

LMZJ1-0.66W
5 cols · 3 rows

LMZ (J)1-0.66W Outdoor Busbar-Type Current Transformer

ModelRated primary current (A)Rated output (VA)
0.20.51
LMZ1-0.66W5-200—510
LMZ1-0.66W300-4002.5510
LMZJ1-0.66W500-120051010
Engineering Drawing

Specification & Outline Drawing

Dimension & outline drawing of LMZJ1-0.66W — click image to zoom / view original.

Product Overview

About This Product

LMZJ1-0.66W

When low-voltage outdoor distribution boards need accurate metering without the bulk of a wound-primary transformer, this busbar-type current transformer addresses the problem by passing the primary conductor straight through its core. The LMZJ1-0.66W is rated for 0.66kV systems at 50/60Hz and is intended for current measurement in low-voltage outdoor metering circuits.

Its dry epoxy resin body encapsulates the winding, and each unit is checked at the factory for ratio and polarity before dispatch; routine-test documentation is available [On Request]. The approved parameter table lists a primary current range of 500-1200A with rated outputs of 5VA at class 0.2, 10VA at class 0.5 and 10VA at class 1. Secondary current is 1A or 5A [On Request]. Because it carries no primary fuses, the protection scheme relies on upstream devices, so it suits metering duty rather than fault interruption.

Compliance with IEC 61869 and GB/T 20840 supports calibration certificates for trade-settlement metering where required. Typical deployment includes outdoor distribution and renewable-energy collection points. Never open-circuit the secondary while energized. Sample and type-test support are available on request.

Other Models in This Series

Same product family, different ratings — compare before you specify.

LMZJ1-0.5 Indoor Low Voltage Current Transformer 0.5kV
0.5kV
Current Transformer50/60Hz

LMZJ1-0.5

Indoor Low Voltage Current Transformer 0.5kV

Indoor low voltage current transformer, 0.5kV rated, epoxy resin casting type, for current measurement and protection in low voltage distribution systems. Complies with IEC 60044-1 and GB/T 1208 standards. Wide range of current ratios available, multiple accuracy classes 0.2, 0.5, 1.0. Compact size, easy installation, suitable for switchgear and panel mounting. Customizable ratios and specifications.

Accuracy Class0.2/0.5/1.0
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
ComplianceIEC 60044-1 / GB/T 1208
View Specs
CGIS2010 Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS2010

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS2010 Current Transformer Applied to CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
CGIS1765 Current Transformer Applied to CGIS Gas Insulated Switchgear
35kV
Current Transformer50/60Hz

CGIS1765

Current Transformer Applied to CGIS Gas Insulated Switchgear

CGIS1765 Current Transformer Applied to CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV. Design: Dry Epoxy Resin, 50/60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs