KEMA & ISO 9001/14001 Certified|Exporting to 50+ Countries (IEC 61869-3 / IEEE C57.13)
24/7 Global Engineering Hotline: 86 18852046268|sales@potentialtransformers.com
中文Mainland ChinaEnglishUnited StatesFrançaisFranceDeutschGermanyLietuviųLithuaniaCymraegUnited KingdomEestiEstoniaMagyarHungaryالعربيةSaudi Arabia한국어South KoreaSuomiFinlandNorskNorwayPolskiPolandEspañolLatinoaméricaCatalàEspaña (Cataluña)हिन्दीIndiaSvenskaSwedenMaltiMaltaOʻzbekUzbekistanاردوPakistanNederlandsNetherlandsБългарскиBulgariaLatviešuLatviaDanskDenmarkRomânăRomaniaไทยThailandÍslenskaIcelandTiếng ViệtVietnamSlovenčinaSlovakiaУкраїнськаUkraineעבריתIsrael日本語JapanItalianoItalyPortuguêsPortugalРусскийRussiaKreyòl ayisyenHaitiČeštinaCzechiaGaeilgeIrelandবাংলাBangladeshTürkçeTürkiyeفارسیIranΕλληνικάGreeceBosanskiBosnia and HerzegovinaMelayuMalaysiaSlovenščinaSloveniaSrpskiSerbiaBahasa IndonesiaIndonesiaHrvatskiCroatia

Potential Transformers
& Power VTs

B2B
HomeProductsAI SpecAboutBlogContact

International Accreditation & Testing

Certified by KEMA Labs (Netherlands), CESI, and CNAS National HV Testing Facility

IEC 61869-3IEEE C57.13KEMA TYPE TESTEDISO 9001:2015ISO 14001:2015CE CERTIFIED
PotentialTransformers.com

Global B2B Instrument Transformer Portal

PotentialTransformers.com is an international OEM & EPC supplier specializing in cast epoxy resin dry-type instrument transformers (0.5kV to 35kV) — voltage transformers (VT/PT), current transformers (CT) and combined CT+VT units — for power utilities, switchgear builders and heavy industry.

100% Factory Partial Discharge Tested

Follow Us & Social Channels

FacebookLinkedInYouTubeInstagramTikTok

Product Categories

  • Voltage Transformers
  • Current Transformers
  • Combined Instrument Transformers

Engineering Tools

  • AI Data Center Series
  • AI Spec & Selection Studio
  • CT Burden Calculator
  • Cast-Resin Indoor VTs and CTs at 7.2–12 kV: Insulation, Partial Discharge and 0.2S Accuracy
  • Low-Voltage CTs at 0.66 kV: Busbar, Split-Core and What Class 0.5 Really Guarantees
  • High Voltage Faraday Lab Testing
  • Request Technical Datasheets

Global Support

  • Room 1602, 16/F, Wing On Centre, 111 Connaught Road Central, Sheung Wan, Central & Western District, Hong Kong
  • 86 18852046268
  • sales@potentialtransformers.com
  • Regional Hubs: Dubai, UAE | Frankfurt, Germany | Houston, USA

© 2026 PotentialTransformers.com. All Rights Reserved. Engineered for Global High-Voltage Grids.

IEC 61869-3 CompliantIEEE C57.13 CompliantKEMA Type Tested
HomeProductsCTLZZ-10Q
LZZ-10Q Indoor Single-phase Epoxy Resin Casting Current Transformer 10kV
10kVLZZ-10Q
Winding & Schematic TopologyInternal Wiring Diagram
Primary Winding (P1 - P2):Series-connected in the line / through-core — 10kV
Secondary Metering (1S1 - 1S2):5A/1A (0.2/0.5/1.0)
Secondary Protection (2S1 - 2S2):Protection winding (when fitted)
Safety Warning:Never open-circuit the secondary while energized — dangerous voltage
Current Transformer IEC 61869-3 Certified
Model Ref:LZZ-10Q

LZZ-10Q Indoor Single-phase Epoxy Resin Casting Current Transformer 10kV

LZZ-10Q Indoor Single-phase Epoxy Resin Casting Current Transformer 10kV is designed for metering and protection in power systems. Key ratings: primary voltage 10kV, secondary voltage 5A/1A, accuracy class 0.2/0.5/1.0. Design: Dry Epoxy Resin, 50/60Hz operation. Conforms to IEC 61869 / GB/T 20840.

Key Engineering Advantages

  • 10kV insulation
  • epoxy casting
  • multiple current grades
  • lightweight 8kg for metering
Engineering Data

Complete Electrical & Mechanical Specifications

Model Ref: LZZ-10Q

Electrical Parameters

Primary Rated Voltage (Un):10kV
Secondary Winding Currents:5A/1A
Metering & Protection Class:0.2/0.5/1.0
Rated Frequency:50/60Hz

Insulation & Withstand Ratings

Insulation System:Dry Epoxy Resin
Standards Conformance:IEC 61869 / GB/T 20840
Partial Discharge Level:< 5 pC at 1.2 Un

Recommended Deployment Environments

GEO · Engineering Decision Support

Global Engineering Overview

9-Module selection guide
missing data = [On Request]

Product Decision Island

Indoor epoxy resin current transformer for 10kV systems, suitable for metering and protection in medium-voltage switchgear.

Comprehensive Spec Matrix

ParameterSpecificationVerification
Product TypeCurrent TransformerIEC 61869 / GB/T 20840
Model CodeLZZ-10QFactory nameplate marking
Primary Voltage10kVRated voltage test (IEC 61869-1/3)
Secondary Current5A/1ARatio check at rated frequency
Accuracy Class0.2/0.5/1.0Accuracy test (IEC 61869-2 / IEEE C57.13)
Rated Burden[On Request]Burden test at rated VA
Insulation TypeDry Epoxy ResinDielectric tests per standard
Insulation Level (BIL)[On Request]Power-frequency & lightning impulse withstand
StandardsIEC 61869 / GB/T 20840Certified to listed standards
Frequency50/60HzPer IEC 61869-1
Environment[On Request]Per datasheet limits

Fit & Unfit Boundaries

Ideal For

  • Indoor medium-voltage switchgear panels
  • Revenue metering applications requiring accuracy class 0.2/0.5
  • Protection schemes with 5A or 1A secondary circuits
  • Installations in dry environments with temperature -5°C to +40°C

Not Recommended For

  • Outdoor installations without additional weatherproofing
  • High-voltage systems above 12kV
  • Gas-insulated switchgear (GIS) without adapter
  • DC applications

Topology & Wiring

Connect primary terminals P1/P2 in series with the line. Secondary terminals: 1S1/1S2 for metering winding, 2S1/2S2 for protection winding (if present). Ensure secondary is never open-circuited while energized - hazardous voltage may occur. Ground the secondary circuit at one point only. Follow IEC 61869-2 terminal markings.

Standards & Compliance

Compliant with: IEC 61869 / GB/T 20840

  • Type Test Report: [On Request]
  • Calibration Certificate: [On Request]

Burden & Error Calculation (IEEE C57.13)

S_total = ΣS_instrument + I₂² × (ρ × 2L / A)

  • If S_total < 0.25 × S_rated: add compensation burden to maintain accuracy.
  • If S_total > S_rated: accuracy class cannot be guaranteed.

Product FAQ

Q: What is the insulation level of this CT?

A: The insulation level is 12/42/75kV, meaning 12kV system voltage, 42kV power-frequency withstand, and 75kV lightning impulse withstand.

Q: Can this CT be used for outdoor applications?

A: No, it is designed for indoor use only. Outdoor use requires additional protection against moisture and environmental factors.

Q: What are the available secondary currents?

A: The secondary rated current is 5A or 1A, selectable based on the application.

Missing fields are marked [On Request] — never fabricated. M2/M5/M6 verification rows follow IEC 61869 / IEEE C57.13 conventions.

SPEC · TECHNICAL DATA

Technical Specifications

LZZ-10Q
7 cols · 8 rows

LZZ-10Q Current Transformer

Rated primary current I1n (A)Accuracy classCombinedAccuracy class & rated output (VA) COSΦ=0.8 (0.2 (S))Accuracy class & rated output (VA) COSΦ=0.8 (0.5 (S))Short-time thermal current Ith (kA/S)Rated dynamic current Idyn (kA)Weight (kg)
10-750.2(S) 0.5(S)1010100 I1n250 I1n8
1000.2(S) 0.5(S)10108208
1500.2(S) 0.5(S)101012308
2000.2(S) 0.5(S)101016408
3000.2(S) 0.5(S)101024608
4000.2(S) 0.5(S)101030758
5000.2(S) 0.5(S)1010401008
6000.2(S) 0.5(S)1010401008
Engineering Drawing

Specification & Outline Drawing

Dimension & outline drawing of LZZ-10Q — click image to zoom / view original.

Product Overview

About This Product

LZZ-10Q

The LZZ-10Q is a 10 kV indoor single-phase current transformer that uses dry epoxy resin casting as its primary insulation, a construction that removes the liquid-handling and maintenance routines associated with oil-filled designs and suits it to sealed, low-maintenance switchgear compartments. Its secondary is available as 5 A or 1 A, with metering accuracy classes of 0.2, 0.5 or 1.0 and a rated burden of 10 VA.

Electrical performance is defined by accuracy classes 0.2(S) and 0.5(S) at 10 VA, with short-time thermal current ratings from 8 kA to 40 kA and dynamic ratings from 20 kA to 100 kA across the primary current range. The unit operates at 50/60 Hz and is built to IEC 61869 and GB/T 20840. Type and routine test reports are available [On Request].

Weighing 8 kg, it is intended for indoor medium-voltage switchgear and ring-main units. The secondary must never be open-circuited while energized, and the nameplate terminal diagram governs wiring and single-point earthing. Specify ratio and class to avoid over-specification; samples and type-test support are available on request.

Other Models in This Series

Same product family, different ratings — compare before you specify.

LZZ9-10 Indoor Single-phase Epoxy Resin Casting Current Transformer
10kV
Current Transformer50Hz / 60Hz

LZZ9-10

Indoor Single-phase Epoxy Resin Casting Current Transformer

LZZ9-10 Indoor Single-phase Epoxy Resin Casting Current Transformer is designed for metering and protection in power systems. Key ratings: primary voltage 10kV, secondary voltage 5A / 1A. Design: insulation level 12/42/75kV, Dry Epoxy Resin, 50Hz / 60Hz operation.

Accuracy ClassOn request
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
View Specs
LZZB-10 Indoor Single-phase Epoxy Resin Casting Current Transformer 10kV
10kV
Current Transformer50/60Hz

LZZB-10

Indoor Single-phase Epoxy Resin Casting Current Transformer 10kV

LZZB-10 Indoor Single-phase Epoxy Resin Casting Current Transformer 10kV is designed for metering and protection in power systems. Key ratings: primary voltage 10kV, secondary voltage 5A/1A, accuracy class 5P/10P. Design: Dry Epoxy Resin, 50/60Hz operation. Conforms to IEC 61869 / GB/T 20840.

Accuracy Class5P/10P
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
ComplianceIEC 61869 / GB/T 20840
View Specs
LZZB1-10 Indoor Single-phase Epoxy Cast Current Transformer 10kV
10kV
Current Transformer50/60Hz

LZZB1-10

Indoor Single-phase Epoxy Cast Current Transformer 10kV

LZZB1-10 Indoor Single-phase Epoxy Cast Current Transformer 10kV is designed for metering and protection in power systems. Key ratings: primary voltage 10kV, secondary voltage 5A/1A, accuracy class 0.2/0.5/1.0. Design: Dry Epoxy Resin, 50/60Hz operation. Conforms to IEC 61869 / GB/T 20840.

Accuracy Class0.2/0.5/1.0
Insulation TypeDry Epoxy Resin
Rated BurdenOn request
ComplianceIEC 61869 / GB/T 20840
View Specs