LZZB9-35-198K2-CGIS Current Transformer for CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 35kV, secondary voltage 5A or 1A. Design: insulation level 40.5/95/185kV, Dry Epoxy Resin, 50Hz / 60Hz operation.
LZZB9-35-198K2-CGIS is a dry epoxy resin current transformer for 35kV CGIS gas-insulated switchgear, with primary voltage 10kV and secondary 5A or 1A. It is suitable for metering and protection in indoor gas-insulated switchgear applications.
| Parameter | Specification | Verification |
|---|---|---|
| Product Type | Current Transformer | [On Request] |
| Model Code | LZZB9-35-198K2-CGIS | Factory nameplate marking |
| Primary Voltage | 35kV | Rated voltage test (IEC 61869-1/3) |
| Secondary Current | 5A or 1A | Ratio check at rated frequency |
| Accuracy Class | [On Request] | Accuracy test (IEC 61869-2 / IEEE C57.13) |
| Rated Burden | [On Request] | Burden test at rated VA |
| Insulation Type | Dry Epoxy Resin | Dielectric tests per standard |
| Insulation Level (BIL) | 40.5/95/185kV | Power-frequency & lightning impulse withstand |
| Standards | [On Request] | Certified to listed standards |
| Frequency | 50Hz / 60Hz | Per IEC 61869-1 |
| Environment | [On Request] | Per datasheet limits |
Ideal For
Not Recommended For
For current transformers, connect secondary terminals 1S1 and 1S2 for the main winding; if a protection winding is present, use 2S1-2S2. Never open-circuit the secondary of a CT while energized - hazardous voltage may occur. Ground the secondary winding at one point. Ensure proper shorting before disconnecting the secondary circuit. Follow IEC 61869-2 and GB/T20840.2 for installation and testing.
Compliant with: [On Request]
S_total = ΣS_instrument + I₂² × (ρ × 2L / A)
Q: What is the primary voltage rating of this CT?
A: The primary voltage is 10kV, but it is designed for use in 35kV CGIS switchgear.
Q: What are the secondary output options?
A: The secondary output can be 5A or 1A, depending on the required ratio.
Q: Is this CT suitable for outdoor use?
A: No, it is designed for indoor CGIS gas-insulated switchgear applications.
Missing fields are marked [On Request] — never fabricated. M2/M5/M6 verification rows follow IEC 61869 / IEEE C57.13 conventions.
| Rated primary current I1n (A) | Accuracy classCombined | Accuracy class & rated output (VA) COSφ=0.8 | Accuracy class & rated output (VA) COSφ=0.8 | Accuracy class & rated output (VA) COSφ=0.8 | Accuracy class & rated output (VA) COSφ=0.8 | Accuracy class & rated output (VA) COSφ=0.8 | Short-time thermal current Ith (kA/S) | Rated dynamic current Idyn (kA) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| 20-50 | 0.2(5)/0.5(5) 0.2(5)/5P 0.5(5)/5P 0.5(5)/5P/5P | 15 | 20 | 25 | 20 | 15 | 150/1n | 375/1n | 62 |
| 75-150 | 0.2(5)/0.5(5) 0.2(5)/5P 0.5(5)/5P 0.5(5)/5P/5P | 15 | 20 | 25 | 20 | 15 | 150/1n | 375/1n | 62 |
| 200 | 0.2(5)/0.5(5) 0.2(5)/5P 0.5(5)/5P 0.5(5)/5P/5P | 15 | 20 | 25 | 20 | 15 | 31.5 | 80 | 62 |
| 300 | 0.2(5)/0.5(5) 0.2(5)/5P 0.5(5)/5P 0.5(5)/5P/5P | 15 | 20 | 25 | 20 | 15 | 45 | 112.5 | 62 |
| 400 | 0.2(5)/0.5(5) 0.2(5)/5P 0.5(5)/5P 0.5(5)/5P/5P | 15 | 20 | 25 | 20 | 15 | 45 | 112.5 | 62 |
| 500 | 0.2(5)/0.5(5) 0.2(5)/5P 0.5(5)/5P 0.5(5)/5P/5P | 15 | 20 | 25 | 20 | 15 | 45 | 112.5 | 62 |
| 600-800 | 0.2(5)/0.5(5) 0.2(5)/5P 0.5(5)/5P 0.5(5)/5P/5P | 20 | 20 | 30 | 25 | 20 | 63 | 130 | 62 |
| 1000-1250 | 0.2(5)/0.5(5) 0.2(5)/5P 0.5(5)/5P 0.5(5)/5P/5P | 20 | 20 | 30 | 25 | 20 | 80 | 160 | 62 |
| 1500-2500 | 0.2(5)/0.5(5) 0.2(5)/5P 0.5(5)/5P 0.5(5)/5P/5P | 20 | 20 | 30 | 25 | 20 | 100 | 150 | 62 |
Dimension & outline drawing of LZZB9-35-198K2-CGIS — click image to zoom / view original.
The LZZB9-35-198K2-CGIS is a 35kV current transformer built for CGIS gas-insulated switchgear, converting primary current to a 5A or 1A secondary for metering and protection. Its dry epoxy resin insulation reaches 40.5/95/185kV, and the K2 structural design is offered in two dimension options covering 50-1250A and 1500-2500A primary ratings.
Metering and protection cores are combined in one housing: accuracy classes 0.2(S), 0.5(S), 5P10 and 5P15 are available with rated outputs of 15VA, 20VA or 25VA, matched to the connected secondary burden at 50Hz or 60Hz. Short-time thermal current and rated dynamic current follow the primary rating, with the unit weighing 62kg.
Intended for indoor installation inside 35kV CGIS switchgear, this unit suits substation, rail and industrial power distribution where a compact resin-cast CT is required. Secondary circuits must never be open-circuited while energized, and the secondary should be earthed at one point per the nameplate terminal diagram. Verify secondary burden against the rated VA before energization. Compliance evidence to IEEE C57.13 and other standards is available [On Request], as are ratio and accuracy-class customization, document packages and delivery terms.
Same product family, different ratings — compare before you specify.
Current Transformer for CGIS Gas Insulated Switchgear
LZZB9-12-35-168-CGIS Current Transformer for CGIS Gas Insulated Switchgear is designed for metering and protection in power systems. Key ratings: primary voltage 12kV/35kV, secondary voltage 5A or 1A. Design: insulation level 12/42/75, 40.5/95/185kV, Dry Epoxy Resin, 50Hz / 60Hz operation.
Current Transformer for CGIS Gas Insulated Switchgear
LZZB9-35-198-CGIS is an indoor epoxy resin cast current transformer dedicated to 35kV CGIS gas-insulated (inflatable) switchgear cabinets. It is built for compact CGIS panels and offers excellent thermal and dynamic stability, with configurable current ratios and accuracy classes for metering and protection. Design and testing follow GB/T 20840.1, GB/T 20840.2, IEC 61869-1 and IEC 61869-2.
Current Transformer Applied to CGIS Gas Insulated Switchgear
CGIS2070 I is an indoor epoxy resin casting current transformer designed for CGIS gas-insulated switchgear at 35kV. It is available with accuracy classes 0.2FS10, 0.5SFS10, 5P10, 10P10, 5P20 and 10P20. The epoxy casting has an outer diameter of Ø205mm and a through (inner) diameter of Ø70mm for busbar installation, and is rated for 50/60Hz operation. Metering classes (0.2FS10, 0.5SFS10) and protection classes (5P10, 10P10, 5P20, 10P20) cover both measurement and relay protection inside CGIS panels.